VSKY02400603 www.vishay.com vishay semiconductors rev. 1.3, 23-feb-17 1 document number: 85911 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal schottky diode flipky ? gen 2 mechanical data case: clp0603-2m features ? schottky diode for high-speed switching ? very low dimensions: ? 0.6 mm x 0.3 mm x 0.29 mm ? 0.2 a forward current ? low forward voltage drop (typ. 475 mv at 0.2 a) ? low reverse current (< 3 a at 10 v) ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 ? ? x parts table part ordering code internal construction package name type marking weight taped units per reel (8 mm tape on 7" reel) minimum order quantity VSKY02400603 VSKY02400603-g4-08 single diode clp0603-2m 24 0.115 mg 15 000 15 000 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 40 v forward continuous current i f 200 ma surge forward current 8.3 ms half sine-wave i fsm 6a power di ssipation footprint acc. fig. 4 p tot 278 mw infinite heat sink 1712 thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air acc. jedec ? 51-3 footprint acc. fig. 4 r thja 450 k/w thermal resistance junction to lead infinite heat sink r thjl 73 maximum operating junction temperature t j 150 c storage temperature range t stg -65 to +150 electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol typ. max. unit leakage current v r = 10 v i r 3a v r = 40 v i r 10 a forward voltage i f = 10 ma v f 295 360 mv i f = 100 ma v f 400 490 mv i f = 200 ma v f 475 540 mv diode capacitance v r = 0 v, f = 1 mhz c d 30 pf
VSKY02400603 www.vishay.com vishay semiconductors rev. 1.3, 23-feb-17 2 document number: 85911 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - typical forward current vs. forward voltage at various temperatures fig. 2 - typical reverse leakage current vs. reverse voltage at various temperatures fig. 3 - typical capacitance vs. reverse voltage fig. 4 - typical thermal impedance 10 100 1000 10000 0.1 1 10 100 0 0.1 0.2 0.3 0.4 0.5 axis title 1st line 2nd line 2nd line i f (ma) v f (v) 2nd line t j = 150 c 50 c 75 c 25 c 125 c 100 c 10 100 1000 10000 0.1 1 10 100 1000 10 000 0 5 10 15 20 25 30 35 40 axis title 1st line 2nd line 2nd line i r (a) v r (v) 2nd line t j = 150 c 100 c 75 c 50 c 25 c 125 c 10 100 1000 10000 0 5 10 15 20 25 30 0 10203040 axis title 1st line 2nd line 2nd line c d (pf) v r (v) 2nd line f = 1 mhz 10 100 1000 10000 10 100 1000 10 000 0.001 0.01 0.1 1 10 100 1000 axis title 1st line 2nd line 2nd line z th - thermal impedance (k/w) t p - pulse width (s) 2nd line infinite heatsink 0.50 0.12 0.12 0.21 0.19 minimum footprint (in mm)
VSKY02400603 www.vishay.com vishay semiconductors rev. 1.3, 23-feb-17 3 document number: 85911 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: clp0603-2m ? footprint and solder ing recommendation: ? please see application note: www.vishay.com/doc?85917 rev.3 - date: 15. feb. 2017 22825 document no.: s8-v-3906.04-038 (4) l2 l3 a d a1 e e c cathode marking b2 b3 min. max. a a1 b2 b3 d e e l2 l3 0.25 - 0.19 0.17 0.29 0.59 0.40 0.10 0.10 0.29 0.02 0.24 0.22 0.33 0.63 0.15 0.15
VSKY02400603 www.vishay.com vishay semiconductors rev. 1.3, 23-feb-17 4 document number: 85911 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 carrier tape in millimeters: clp0603 orientation in carrier clp0603 a a-a s ection a 4 0.1 2 0.05 1.75 0.1 b b 8 + 0.3 - 0.1 b-b s ection 0.37 0.03 0.67 0.03 5 max. 2 0.33 0.03 0.2 0.02 ? 0.2 0.05 ? 1.55 0.05 3.5 0.05 cummulative tolerance s of 10 s procket hole s i s +/-0.2mm 22591 document no. s 8-v-3906.04-0025 (4) created - date: 22. nov. 2010 clp0603 top view unreeling direction pin 1 a detail a 50:1 orientation in carrier tape (clp0603) s 8-v-3906.04-026 (4) 22.10.2010 22936
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
